MANUFACTURERS :: Summit Industrial Products

Summit logo

Parts and Power are the Caribbean distributor of Summit Industrial Products, among many others. We know how important it is to have stock right there whenever it’s needed and we strive to save customers time while providing them with the service they require.

The Summit Industrial Products range focuses on building the highest quality descaling (such as Sublime Descaler), lubricants & degreasing products that are environmentally friendly, and backing it up with uncompromising customer service. The company is recognized as an industry leader in synthetic lubricant technology and their line of over 200 products can service almost any industrial application.

For 30 years, Summit has functioned on the premise that their success is based wholly on the success of those who use their products. Because of that, they are constantly evaluating new base stocks and additives to provide their customers with the best lubricants technically available.

Parts and Power provide Summit Industrial Products (such as Sublime descaler) that work better, are environmentally friendly, yet are lower cost than the competition. Factory direct prices and high volume make the difference.

Sublime Descaler

Overview

Sublime® Descaler is a water-based solvent with wetting agents, corrosion inhibitors and degreasing compounds. It has a pleasant citrus-lime fragrance that masks the obnoxious odors normally associated with dissolving water scale and corrosion. Sublime® Descaler is low-foaming and quickly releases the carbon dioxide (CO2) gas generated by the reaction of lime scale with Sublime®.

Sublime® descaler comes in a pale yellow color that changes to a deep bluish-purple when it is spent. The advantages to this color change are:

  • Know when the solution is spent and should be discarded
  • Don’t spend time circulating a spent solution

The color change occurs at a pH of 5.8 to 6.0 which is well within the safe disposal range of most of the current governmental waste regulations.

Recommended Uses

Sublime® Descaler is designed to penetrate and remove encrusted lime scale, rust, corrosion products and dirt from water-wetted surfaces in process equipment, commercial and industrial applications. Sublime® is most effectively used by circulating through the equipment to be cleaned. When possible, circulation should be up-flow.

Sublime® can also be used by filling the equipment to be cleaned and allowing it to set until scale has disappeared. The cleaning operation normally takes two to six hours. It is non-toxic, non-corrosive, non-flammable and non-hazardous when used as directed. Sublime® descaler is registered as NSF-A3 and U.S.D.A. approved as specified in 40 CRF 261. And D.O.T. 173.240(a).

sublime
sublime

Morcon-10 Descaler

Overview

Morcon-10 was developed to remove cement and other calcium materials (lime-scale, barnacles, mussels) from places where they may cause a problem. Morcon-10 is a hydrochloric acid solution that contains corrosion inhibitors, detergents, wetting agents and degreasing compounds. It is designed to penetrate encrusted scale, cement, and barnacles and quickly remove them from the surface.

When used as directed, Morcon-10 may be safely brushed, mopped or sprayed on equipment and structural surfaces. It may be circulated through pumps and exchangers. Parts may be soaked. It is non-toxic, non-corrosive, non-flammable and non-hazardous when used as directed. Because it is biodegradable, standard disposal procedures may be followed.

Recommended Uses

Morcon-10 was developed to remove cement and concrete from trucks, building forms, concrete mixers, pumps, and all sorts of construction equipment. It can also be used to clean excess mortar from bricks, tile and concrete blocks; remove barnacles from propellers, skegs, rudders, and hulls of sea going vessels; remove barnacles and mussels from pipe, screens, pumps, and exchangers in power plants; and remove rust and stains from floors and process equipment.

Morcon-10 is not recommended for use on aluminium, certain alloys, zinc, and alloys of magnesium. The improper use of Morcon-10 could result in the discoloration of automotive paint finish.

Xtra-Clean Degreaser

Overview

Xtra-Clean is Summit’s strongest maintenance cleaning compound. Ideal for industrial cleaning, this super-concentrate is formulated to melt-though the dirtiest and oiliest projects you can find. Xtra-Clean is non-flammable, non-abrasive, non-corrosive, non-toxic and biodegradable, Safe for ferrous and non-ferrous metals. Environmentally friendly, Xtra-Clean contains NO phosphates, chlorinated hydrocarbons, sodium hydroxide or petroleum distillates, specifically naphtha and benzene. It is also NSF registered A8 and C1 and meets USDA standards, authorizing its use in federally inspected meat and poultry plants where there is no food contact.

Overview

Xtra-Clean Degreaser is specially formulated for cleaning oily and greasy surfaces such as: oil rigs, engines, oil side of heat exchangers, pipes, cleaning vats, conveyors, exhaust stains, machines, metal stock welding equipment and greasy floors. Xtra-Clean gives new meaning to industrial strength.

Alimex Descaler

Overview

Alimex is a water-based chemical formulated to safely clean lime scale and corrosion from water-wetted surfaces. It contains wetting agents, corrosion inhibitors and degreasing compounds to help penetrate and carry away the scale and corrosion. This product is specifically designed to be used on equipment that contains aluminium that cannot be safely cleaned with other scale removing compounds.

When used as directed, Alimex is non-corrosive and will not affect the following: aluminium, stainless steel, carbon steel, brass, admiralty metal, copper, iron, lead, PVC plastic, polyethylene, rubber leather, and most materials found in water-wetted equipment. Alimex is not recommended for zinc, galvanized steel, or alloys of magnesium.

ALIMEX is non-toxic, non-corrosive, and non-flammable when used as directed. It is biodegradable and can be safely put into the sewer in the spent condition. It also has a built-in indicator which changes color when the solution is 95+ percent spent. When the solution begins to turn blue, it should be added to or changed if the equipment is not clean.

Overview

Alimex is a water-based chemical descaler formulated for the safe removal of scale from water-wetted aluminium surfaces. Aided by wetting agents, corrosion inhibitors and degreasing agents, it effectively loosens and removes deposits from critical aluminium components such as heat exchangers, fin fans, and any other aluminium coated surface.

Galvan Plus

Overview

Summit Galvan-Plus is an acid-free descaler built specifically for galvanized metal cleaning. Galvan-Plus is designed to safely remove lime deposits or water scale from cooling towers (basin), water lines and galvanized pipe fittings where stronger, acid-based descalers would degrade the metal. It is 4 to 10 times more effective than citric and glycolic acids and 2 to 3 times more effective than phosphoric acid.

Overview

Galvan-Plus is most effectively used by circulating through the equipment that needs cleaning, providing that there is adequate venting for the carbon dioxide created in the cleaning process. One gallon of GalVan-Plus will consume 1.1 pounds of Calcium Carbonate (CaCO3).

Sur-Clean Degreaser

Overview

Sur-Clean® industrial degreaser and cleaner is an all-purpose cleaner that is non-flammable, non-abrasive, non-corrosive, non-toxic and biodegradable. It is a water-based synthetic detergent that will cut time and clean-up costs in a variety of institutional, commercial and general applications. Environmentally friendly, Sur-Clean® contains NO phosphates, chlorinated hydrocarbons, ethylene glycol monobutyl ether, sodium hydroxide, sodium silicates or petroleum distillates, specifically naphtha and benzene.

Overview

Sur-Clean® Degreaser is an all-purpose cleaner that is safe on glass at a 1:20 dilution, it is recommended for trucks, cars, windows, floors, metal parts and painted walls.

Click here to read the EnviroTech Green Cleaner Brochure

Our prices for all offers, including our Caribbean parts specials and marine special offers, are subject to change without notice.

Parts & Power is a distributor of many manufacturers so if you can’t find the product or part you are looking for here, please contact us at info@partsandpower.com or call +1(284)494-2830. We have many more products in our stock!

You will find Parts & Power Ltd products all over the Caribbean. We have dealers in the following Caribbean locations: Antigua & Barbuda, Barbados, British Virgin Islands, Dominica, Grenada, Guadeloupe, Martinique, St. Kitts & Nevis, St. Lucia, St. Martin / Sint Maarten, Trinidad & Tobago, US Virgin Islands.

Tel: +1(284)494-2830/440-2830

Tel: +1(284)494-2830/440-2830

Copyright © 2007-2024 Parts & Power Ltd., All rights reserved.